Radar cable with two connector

Activities: Small series production

Area of use: In Development/Testing

Basic informations:

Environment of use:

• Used for signal transmission 
• Tested in a temperature chamber (Temperature range: from -40 °C to +140 °C)
• Used/tested in liquid (Waterproof design required)

Types of cables to be used:

• Assembled with 0.5mm2 or smaller wires
• Assembled with higher than 0.5mm2 wires
• Assembled with a multi-core cable

Are there any parts that the customer provides?

• All parts purchased by ProDSP

Post-production tests:

• Basic inspection (Visual and electrical inspection)
• Leakage test

Documents shared by customer:

• Pin assignment/pin layout
• Parts list
• Schematic diagram

Brief description of cable by the customer:

The customer's request was the production of 30 cables, which were connected to a measuring tower manufactured by us. On one side there are 2 DUT connectors, one of which is a FAKRA socket equipped with a Rosenberger connector, while the other side is equipped with 2 D-SUB 9, 2 Banana plugs, and 3 Banana socket connectors. It was installed with 0.35mm2 and 0.75mm2 wires and twisted Flex-ray cable and finally labeled. A special request was the unique identification Bar-code on the cable and an additional label. All parts were procured by ProDSP. The customer provided a pin assignment and a schematic diagram. Another special requirement was compliance with low and high temperature test environments and a 100% leakage test against ingress of liquids.

Price range: 200-220 euro/Harness *

* The prices show an approximate value, depending on what other components, wire types, sizes and quantities required, as well as the types of tests to be performed and may also be influenced by the defined requirements for the environment of use.