Electronic-test equipment restoration

Activities: Cable rework

Area of use: In Development/Testing

Basic informations:

Cables order quantity: 6 [db]
Total cable length: 3.5 [m]
Approximate number of wires per cable: 90 [szál]
Wire cross-sections: 0.35; 0.5; 1.5 [mm2]

Environment of use:

  • Used for signal transmission
  • Tested in a temperature chamber (Temperature range: from -40 °C to +140 °C)
  • For high current / high voltage use

Types of cables to be used:

  • Assembled with 0.5mm2 or smaller wires
  • Assembled with higher than 0.5mm2 wires
  • Assembled with a multi-core cable

Are there any parts that the customer provides?

  • All parts purchased by ProDSP

Post-production tests:

  • Basic inspection (Visual and electrical inspection)

Documents shared by customer:

  • Pin assignment/pin layout
  • Parts list
  • Schematic diagram
  • Photos

Brief description of cable by the customer:

The task was to restore a two-nest and a four-nest electronic tester, after 5 years of continuous use. Apart from the nests and holding bracket of the tester, everything must be replaced with new parts (cables, cable sleeves, thermal sensors, industrial connectors, clamps, contact pins and arms of the nests). All parts are purchased by ProDSP. The customer provided a pin layout, parts list, and a schematic diagram. The tester operates in a thermal chamber at a temperature of -40°C to +140°C. The components have to withstand this in the long term. No other special testing requirement needed.

Price range: 12000-16000 euro/cable *

* The prices show an approximate value, depending on what other components, wire types, sizes and quantities required, as well as the types of tests to be performed and may also be influenced by the defined requirements for the environment of use.

autoipari ecu tesztkabel

Back